Back to top

2005 Custom Luux 6.30

Bridgeport, Connecticut

$35,000

This 2005 Luux 6.30 sailboat is cold molded with fiberglass covering mahogany strip planking. The result is a very strong hull with the ease of owning a fiberglass boat. As the mahogany is covered by fiberglass, it does not absorb water as does a typical wooden vessel, thereby reducing the weight of the boat. This vessel is 20’8” in length; the beam is 8’4”; the boat draws 1 foot with the centerboard up and 8 feet with the board down. The centerboard is powered from the battery and can be retracted in 5 to 7 seconds. The mast is tall with Bergstrom rigging (no backstay) which is simpler and allows for a larger mainsail. The hull is unsubmersable (certification completed) and can sleep four people in the cabin (it is however not a large interior).

The sail inventory includes a fully battened mainsail, roller furling genoa and asymmetrical spinnaker.

Auxiliary power is provided by a new Mercury Four Stroke outboard producing 4 HP..

In 2018, the centerboard was removed and replaced with a new SAILTEC hydraulic centerboard system. In 2019, electrical systems were overhauled including the installation of new battery switches, fuses, bilge pump and a hydraulic power pack with controls (for the centerboard system). In addition, the deck was painted in 2019, rudder bracket fastenings were resealed, a keel lock was designed, fabricated and installed, a mast cradle was designed and assembled, topsides and boot top were refinished, all the wood was varnished and a new tiller extension was installed. In 2020 a guide for the centerboard hydraulic system was fabricated. Upgrades to the trailer were made at that time as well. The hull, centerboard and rudders have been freshly bottom coated for the 2024 season.

The electronics only include a compass and depth finder, although the boat is wired for an autopilot. The seller has used a handheld GPS.

A trailer is included with the boat, as is a custom cover.

This sailboat is in turn-key condition and is ready for the 2024 sailing season!

Basic Boat Info

Make: Custom
Model: Luux 6.30
Year: 2005
Condition: Used
Category: Sail
Builder: Yann Dilasser
Designer: Gildas Plessis
Construction: Composite
Boat Hull ID: FR-MEDL6306F404
Has Hull ID: Yes

Dimensions

Length: 20 ft
Length Overall: 20'8 ft
Beam: 8'4 ft
Max Draft: 8 ft
Min Draft: 1 ft
Single Berths: 2

Engines / Speed

Engines: 1
  • Make: Yamaha
  • Model: 8 HP
  • Fuel: Gasoline
  • Engine Power: 8hp
  • Type: Outboard
  • Year: 2005

Other

Boat Class: Racers

Contact

Joe Walkden
Rudders & Moorings Yacht Sales, LLC

Office

Rudders & Moorings Yacht Sales LLC
83 Windward Lane
Bristol, Rhode Island, US, 02809
Tel:1-855-AHOYMATE (1-855-246-9628)


Default
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Additional Contact Information
For more information about this unique racing sailboat please contact the Broker directly at (401) 368-1705 or via email at joewalkden@ruddersandmoorings.com.